850 – 4.5 Gallon Capacity

Low Tunnel Mustang Tanks

Three stylish tanks with the traditional Mustang look, but designed to fit on modern customs with longer stretches in the top tubes. They are all constructed with the stock-style screw-in filler and vent, and have a standard 22mm external thread petcock fitting for OEM and aftermarket petcocks installed on the left-side of the tanks. These tanks are offered in different widths to hold between 4.0 and 4.5 gallons of gas, and each one includes a Paughco #747-2 threaded hose line fitting for the vent bung on the bottom of the tank. When ordering, please pay special attention to the centerline hole-to-hole dimension to get the tank that is right for your application.

Special Notes:
1) Gas caps are not included.
2) Always fit and test gas tanks before painting. Paughco will not warranty after painting.
3) All gas tanks should be mounted on leather and/or rubber spacers or bushings.

Click part number to add to Shopping Cart

850A – 4.2 Gallon Capacity

850B – 4.0 Gallon Capacity

852 – 4.4 Gallon Capacity

High Tunnel Mustang Tanks

Three stylish tanks with the traditional Mustang look, but designed to fit on modern customs with longer stretches in the top tubes. They are all constructed with the stock-style screw-in filler and vent, and have a standard 22mm external thread petcock fitting for OEM and aftermarket petcocks installed on the left-side of the tanks. These tanks are offered in different widths to hold between 3.8 and 4.4 gallons of gas, and each one includes a Paughco #747-2 threaded hose line fitting for the vent bung on the bottom of the tank. When ordering, please pay special attention to the centerline hole-to-hole dimension to get the tank that is right for your application.

Special Notes:
1) Gas caps are not included.
2) Always fit and test gas tanks before painting. Paughco will not warranty after painting.
3) All gas tanks should be mounted on leather and/or rubber spacers or bushings.

Click part number to add to Shopping Cart

852A – 4.0 Gallon Capacity

852B – 3.8 Gallon Capacity

840 – 4.8 Gallon Capacity

Universal Low Tunnel Tanks

These universal tanks are designed to fit on modern customs with longer stretches in the top tubes, and feature a nicely contoured teardrop shape. They are all constructed with the stock-style screw-in filler and vent, and have a standard 22mm external thread petcock fitting for OEM and aftermarket petcocks installed on the left-side of the tanks. These tanks are offered in different widths to hold between 3.5 and 4.8 gallons of gas, and each one includes a Paughco #747-2 threaded hose line fitting for the vent bung on the bottom of the tank. When ordering, please pay special attention to the centerline hole-to-hole dimension to get the tank that is right for your application.

Special Notes:
1) Gas caps are not included.
2) Always fit and test gas tanks before painting. Paughco will not warranty after painting.
3) All gas tanks should be mounted on leather and/or rubber spacers or bushings.

Click part number to add to Shopping Cart

840A – 4.0 Gallon Capacity

840B – 3.5 Gallon Capacity

842 – 4.6 Gallon Capacity

Universal High Tunnel Tanks

These universal tanks are designed to fit on modern customs with longer stretches in the top tubes, and feature a nicely contoured teardrop shape. They are all constructed with the stock-style screw-in filler and vent, and have a standard 22mm external thread petcock fitting for OEM and aftermarket petcocks installed on the left-side of the tanks. These tanks are offered in different widths to hold between 3.4 and 4.6 gallons of gas, and each one includes a Paughco #747-2 threaded hose line fitting for the vent bung on the bottom of the tank. When ordering, please pay special attention to the centerline hole-to-hole dimension to get the tank that is right for your application.

Special Notes:
1) Gas caps are not included.
2) Always fit and test gas tanks before painting. Paughco will not warranty after painting.
3) All gas tanks should be mounted on leather and/or rubber spacers or bushings.

Click part number to add to Shopping Cart

842A – 3.8 Gallon Capacity

842B – 3.4 Gallon Capacity

810 – 3.0 Gallon Capacity

Wide Universal Mustang Tanks

These 3-gallon tanks feature a high-tunnel for a custom Fat Bob look, and have early cam-style gas cap bungs. Both tanks also have internally threaded bungs on the left-side for standard 3/8" NPT aftermarket or HD petcocks. All tanks come with a bare metal finish, and have been pressure tested.

Special Notes:
1) Gas caps are not included.
2) Always fit and test gas tanks before painting. Paughco will not warranty after painting.
3) All gas tanks should be mounted on leather and/or rubber spacers or bushings.
4) On the dual cap tanks, the left-side bung is a non-functioning filler, and uses the same vented gas cap (Paughco #800) as the right-side bung.

Click part number to add to Shopping Cart

811 – 3.0 Gallon Capacity

804 – 2.2 Gallon Capacity

Narrow Universal Mustang Tanks

These 2.2-gallon tanks feature a low tunnel with two choices of front mounting tabs. They have early cam-style gas cap bungs, and internally threaded bungs on both sides for aftermarket 1/4" petcocks. All tanks come with a bare metal finish, and have been pressure tested.

Special Notes:
1) Gas caps are not included.
2) Always fit and test gas tanks before painting. Paughco will not warranty after painting.
3) All gas tanks should be mounted on leather and/or rubber spacers or bushings.
4) On the dual cap tanks, the left-side bung is a non-functioning filler, and uses the same vented gas cap (Paughco #800) as the right-side bung.

Click part number to add to Shopping Cart

805 – 2.2 Gallon Capacity

804A – 2.2 Gallon Capacity

805A – 2.2 Gallon Capacity

806 – 2.2 Gallon Capacity

Wide Universal Mustang Tanks

These tanks feature a low tunnel with two choices of front mounting tabs. They have early cam-style gas cap bungs, and internally threaded bungs on both sides for aftermarket 1/4" petcocks. All tanks come with a bare metal finish, and have been pressure tested.

Special Notes:
1) Gas caps are not included.
2) Always fit and test gas tanks before painting. Paughco will not warranty after painting.
3) All gas tanks should be mounted on leather and/or rubber spacers or bushings.
4) On the dual cap tanks, the left-side bung is a non-functioning filler, and uses the same vented gas cap (Paughco #800) as the right-side bung.

Click part number to add to Shopping Cart

807 – 2.2 Gallon Capacity

806A – 2.5 Gallon Capacity

807A – 2.5 Gallon Capacity

812 – 3.0 Gallon Capacity

Extra-Wide Universal Mustang Tanks

These 3-gallon tanks feature a low tunnel with two choices of front mounting tabs, and early cam-style gas cap bungs. The tanks with straight mounting tabs have two internally threaded bungs for aftermarket 1/4" petcocks, and the tanks with the ‘Horseshoe’ front tab have one internally threaded bung for a 3/8" NPT aftermarket or HD petcock on the left-side. All tanks come with a bare metal finish, and have been pressure tested.

Special Notes:
1) Gas caps are not included.
2) Always fit and test gas tanks before painting. Paughco will not warranty after painting.
3) All gas tanks should be mounted on leather and/or rubber spacers or bushings.
4) On the dual cap tanks, the left-side bung is a non-functioning filler, and uses the same vented gas cap (Paughco #800) as the right-side bung.

Click part number to add to Shopping Cart

813 – 3.0 Gallon Capacity

812A – 3.0 Gallon Capacity

813A – 3.0 Gallon Capacity

806B – 2.4 Gallon Capacity

Extra-Wide Custom Mustang Tanks

These tanks feature a low tunnel with ‘Horseshoe’ front mounting tabs, and come in two different capacities. They have early cam-style gas cap bungs, and internally threaded bungs on both sides for aftermarket 1/4" petcocks. All tanks come with a bare metal finish, and have been pressure tested.

Special Notes:
1) Gas caps are not included.
2) Always fit and test gas tanks before painting. Paughco will not warranty after painting.
3) All gas tanks should be mounted on leather and/or rubber spacers or bushings.
4) On the dual cap tanks, the left-side bung is a non-functioning filler, and uses the same vented gas cap (Paughco #800) as the right-side bung.

Click part number to add to Shopping Cart

807B – 2.4 Gallon Capacity

812B – 3.4 Gallon Capacity

813B – 3.4 Gallon Capacity

804C – 2.4 Gallon Capacity

Narrow-Tunnel Custom Mustang Tanks

These tanks feature a low tunnel with ‘Horseshoe’ front mounting tabs, and come in two different capacities. They have early cam-style gas cap bungs, and internally threaded bungs on both sides for aftermarket 1/4" petcocks. All tanks come with a bare metal finish, and have been pressure tested.

Special Notes:
1) Gas caps are not included.
2) Always fit and test gas tanks before painting. Paughco will not warranty after painting.
3) All gas tanks should be mounted on leather and/or rubber spacers or bushings.
4) On the dual cap tanks, the left-side bung is a non-functioning filler, and uses the same vented gas cap (Paughco #800) as the right-side bung.

Click part number to add to Shopping Cart

805C – 2.4 Gallon Capacity

812C – 3.5 Gallon Capacity

813C – 3.5 Gallon Capacity

Page  1  2

Click Here to See The Master Gas Tank Dimension Chart